The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring, and outside deburring into one fast, easy step. Long-lasting carbide blades simultaneously perform three functions to save time and improve consistency:
- Trims the case to length.
- Chamfers the inside case mouth to an angle of 14°.
- Chamfers the outside case mouth to an angle of 30°.
The Cutter mounts on an Original or Power Case Trimmer. You can trim from 250 to 400 cases per hour.
- First – and only – three-in-one cutter on the market to use high-quality blades made from U.S.-manufactured carbide. If used exclusively on brass cases, these blades should never need sharpening.
- Carbide cutter blades are factory adjusted on the blade holder, ensuring precise cutting.
- Installs by sliding over the Case Trimmer Cutter Shaft and secures with one set screw.
- Caliber-specific Pilots included with 3-in-1 Case Mouth Cutters designed for popular cartridges.
Tip – For cases up to 2.20″ long, use the Base that comes with the Original Case Trimmer. For cases longer than 2.20″, use a Long Base, which can handle cases from 1.0″ to 3.30″ when used with the 3-in-1 Case Mouth Cutter.